NOTICE!

If you have purchased one of our motherboard upgrade kits or Single Board Computers (002544, 002545, 002546), and are connecting it your original, you must connect it with a twist. 

                                                   

The twist must be at the Floppy Drive end with Pin 1 of the Floppy Drive connected to the ribbon cable at the side with the red stripe.  Also, if your original Floppy Drive has a spade adapter, you must remove it for the motherboard kit or Single Board Computer to recognize it.

                                                  

 

Single Board Computers (002544, 002545, 002546)
Single Board Computers (002544, 002545, 002546)

(two styles of spade adapters)

(ribbon with twist)